Do-It-Yourself Wired Home Security Systems

Last updated: November 26, 2023


Wired and wireless systems are both effective at protecting your home, but installing them on your own can be a bit of extra work. If you’re not technically savvy, it might be best to hire an electrician for the job! Well, for wired home security systems do it yourself, you can easily install it yourself. Let’s discuss it further.

Equipment Needs

Your equipment needs are going to differ from system to system. Before starting the installation process, you’ll need to have the device ready to get installed in your new homes and a plan in mind of where they should be installed. Spread out your gear and plug everything together- if it doesn’t power up or work correctly, we can try troubleshooting before installing them into place. If you’re concerned about wires showing through walls or ceilings we suggest you route them through the attic or behind the drywall. (or even behind the drywall), never fear–we’ll make sure that’s not an issue!


Setting up your home’s digital video recorder can help prevent burglaries. Choose and then test the angles that monitor the front, back, side doors, garage door, and driveway; inside the house, have top-rated home security cameras in familiar places such as hallway or living room. The system should come with instructions so pay careful attention when setting up each camera to know what angle it views from, for example, kitchen or bedroom – make sure power cords reach a plug-in point too!

  • Outdoor cameras should be ten feet above the ground.
  • Mark the areas for screws with a marker.
  • Drill a hole then.
  • Insert and then hammer any remaining pins into a piece of equipment.
  • Screw the camera mounting plate into the wall.
  • Ascend the camera to the plate by using the screws.
  • Angle the camera to the place where you want it to catch footage.
  • Attach the power adapter and plug it into an available electrical outlet.

Run the connector wire from your camera to a recording device, one end attached to your camera’s output port, the other to each recorder input port. Each security system will feed into its own input for storage on recorders of varying sizes depending on how many cameras you have in place within range of their signal transmission radius with corresponding RF frequencies (960 MHz).


What’s the best DIY home security system?

  1. Abode Essentials Starter Kit.
  2. Ooma Smart Security Starter Pack.
  3. Blue by ADT. 
  4. SimpliSafe Essentials. 
  5. Ring Alarm.
  6. Abode iota.
  7. Honeywell Smart Home Security.

Is a wired or wireless ring better?

The Ring Video Doorbell Wired ONLY supports 2.4 GHz connections. Still, the 5GHz Wi-Fi is faster and potentially more reliable than 2.4 GHz, which means it would be suitable for a smart doorbell that will transmit many complete HD video recordings like this one!

What is the most accessible home security system to install?

SimpliSafe is the best company for anyone who doesn’t want to deal with complex installation procedures. They offer various DIY home security packages and give users complete control over their system, from customizing it themselves to installing it on their own. Monitored 24/7 by professionals, SimpliSafe offers 60-day risk-free trials without contracts, so you can try them out before committing long term!

What’s better, Ring or SimpliSafe?

The Ring is the leading company for video surveillance and device-equipped cameras, offering a more comprehensive selection of indoor and outdoor devices. SimpliSafe’s two camera options are not enough when compared to Ring’s offerings.


Embrace the control and cost-efficiency of a DIY wired home security system, tailoring safety measures to your needs. Amp up surveillance discreetly with cheap hidden cameras for an added layer of security.

Show More
Back to top button